Environmental Sanitation Engineering ›› 2025, Vol. 33 ›› Issue (3): 97-101.doi: 10.19841/j.cnki.hjwsgc.2025.03.013

Previous Articles     Next Articles

Corrosion Causes and Optimization Scheme for Flue Gas Recirculation Equipment in Waste to Energy Incineration Plants

HU Honglei, LONG Jisheng, WU Yazhong   

  1. 1. Shanghai SUS Environment Co. Ltd.; 2. Zhuhai Xinhuan Environment Co. Ltd.
  • Online:2025-07-01 Published:2025-07-01

Abstract: In recent years, flue gas recirculation technology has been widely applied in waste to energy plants, which could effectively reduce NOx emissions. However, the corrosion of flue gas recirculation equipment has affected the effect and stability of the technology application, so it is urgently needed to explore the causes of corrosion and countermeasures. The flue gas recirculation system of a waste to energy incineration plant in Guangdong province was taken as the research object. The causes of equipment corrosion were analyzed from the perspectives of equipment selection, process layout, operation specifications and so on. Countermeasures were proposed in the directions of design and operation regulation. In design, equipment leakage should be reduced, and protective wind and drainage pipes should be set to reduce corrosion. In operation regulation, strict compliance with the design operating conditions should be ensured for long-term operation.

Key words: waste incineration, flue gas recirculation, equipment corrosion, optimization scheme

[1] CHEN Zihua. Study on Selection and Optimization of Main Design Parameters of Direct Air-cooled Condenser of Municipal Solid Waste Incineration Power Plants [J]. Environmental Sanitation Engineering, 2026, 34(2): 1-8,13.
[2] CHEN Haijun, WANG Zhiqiang, WANG Lifeng. Operation and Design Optimization of Circulating Water Pump in Waste Incineration Power Plant [J]. Environmental Sanitation Engineering, 2026, 34(2): 9-13.
[3] HU Siyi, WANG Ning, ZHANG Hao, YANG Tao, CAI Jiarui, AN Zhaohui, LONG Jisheng, SCHWARZBÖCK Therese, FELLNER Johann, LI Xiaodong. Online Monitoring Method for Carbon Source of Waste Incinerated in Waste-to-Energy Plants and Its Demonstration Application [J]. Environmental Sanitation Engineering, 2026, 34(1): 1-9.
[4] HAN Ping, SHEN Wei, WANG Yongkang, ZHANG Zhe, WANG Yidi, WANG Wei. Performance Analysis and Environmental Safety Assessment of Vitrified Products from Municipal Solid Waste Incineration Fly Ash [J]. Environmental Sanitation Engineering, 2026, 34(1): 72-80.
[5] CUI Chaoxian, MA Zhaojun, ZHAO Xinlei, SHI Meng, CHEN Xuan, ZHANG Sheng, CHEN Rongjie, ZHANG Yanguo. Research on Collaborative Melting Treatment of Municipal Solid Waste Incineration Fly Ash and Red Mud [J]. Environmental Sanitation Engineering, 2026, 34(1): 81-87.
[6] LI Xin, LU Chang, LIN Jianping, ZHU Enlin. Research on Synergistic Operation of In-furnace Dry Process and Conventional Deacidification Processes in Waste Incinerators [J]. Environmental Sanitation Engineering, 2026, 34(1): 88-93.
[7] HAO Zhangfeng, LONG Jisheng. Research and Application of Waste Heat Utiliazation Technology in Waste-to-Energy Plants [J]. Environmental Sanitation Engineering, 2026, 34(1): 94-99.
[8] ZHANG Xiao, WANG Zhongxia, LI Wenming. Characteristics and Health Risk Assessment of Heavy Metal Pollution in Groundwater in the Vicinity of Waste Incineration Plants [J]. Environmental Sanitation Engineering, 2026, 34(1): 109-117.
[9] YE Jian, WANG Ren, ZHANG Ming ZHU Yongjun, SHEN Yu, YAN Zhenguo, XIAO Qiang, XU Zhongjian, CHEN Lun, YU Hong, WANG Yafei, WANG Shoukang, LIN Xiaoqing, HUANG Qunxing. Research on Intelligent Control and System Development for Industrial Solid Waste Incineration [J]. Environmental Sanitation Engineering, 2025, 33(5): 1-10.
[10] LIU Zhuangquan. Design and Engineering Practice on Small and Medium-sized Kitchen Waste Collaborative Disposal Project [J]. Environmental Sanitation Engineering, 2025, 33(5): 70-74.
[11] ZHAO Xi, CAI Xiaowei, YU Cen, XIAO Yao, WEI Si. Comparative Study of Unintentional Emerging Pollutants from Municipal Solid Waste Incineration and Landfill [J]. Environmental Sanitation Engineering, 2025, 33(4): 1-11.
[12] FANG Kaile, ZHOU Qiang, WANG Jun, FENG Zhi, WU Xun. Research Progress on the Resource Utilization of Municipal Solid Waste Incineration Bottom Ash in Concrete [J]. Environmental Sanitation Engineering, 2025, 33(4): 38-45.
[13] YUE Xingyue. Application of Reheat Technology in Ultra-high Pressure Furnace in Waste Incineration Plant [J]. Environmental Sanitation Engineering, 2025, 33(4): 99-103.
[14] QIU Qingwen. Suggestions on Geotechnical Engineering Design of Domestic Waste Incineration Fly Ash Landfill [J]. Environmental Sanitation Engineering, 2025, 33(3): 64-69.
[15] DUAN Panqiao, LI Yaxin, BAI Liangcheng. White Smoke Generation Source and Control in Domestic Waste Incineration Plants [J]. Environmental Sanitation Engineering, 2025, 33(3): 102-106,113.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . Municipal Sewage Sludge Co-firing in Waste Incineration Power Plant: A Case Study of Hengyang City   [J]. Environmental Sanitation Engineering, 2018, 26(3): 14 -17 .
[2] . Inhibition Concentration and Elimination Method of Ammonia Nitrogen in Anaerobic Digestion Process   [J]. Environmental Sanitation Engineering, 2018, 26(3): 33 -35 .
[3] . [J]. Environmental Sanitation Engineering, 2018, 26(1): 70 -72 .
[4] . [J]. Environmental Sanitation Engineering, 2018, 26(2): 22 -25 .
[5] . [J]. Environmental Sanitation Engineering, 2018, 26(2): 26 -28 .
[6] . Research on Planning Strategy of Domestic Waste Management in Yinchuan[J]. Environmental Sanitation Engineering, 2018, 26(4): 81 -83 .
[7] . Application of Anaerobic Digestion and Aerobic Fermentation in Kitchen Waste Treatment Technology Project[J]. Environmental Sanitation Engineering, 2018, 26(4): 90 -93 .
[8] . [J]. Environmental Sanitation Engineering, 2018, 26(5): 4 -7 .
[9] . [J]. Environmental Sanitation Engineering, 2018, 26(6): 9 -11 .
[10] . [J]. Environmental Sanitation Engineering, 2019, 27(2): 28 -32 .
Copyright © Environmental Sanitation Engineering
Address: 107#, Weidi Road, Tianjin, P.R.C.    Postcode: 300201
Telephone: 022-28365069   Fax: 022-28365080 E-mail: csglwyjs10@tj.gov.cn
Supported by:Beijing Magtech