环境卫生工程 ›› 2024, Vol. 32 ›› Issue (1): 50-56.doi: 10.19841/j.cnki.hjwsgc.2024.01.008

• 危险废物利用、处理与处置 • 上一篇    下一篇

生活垃圾焚烧飞灰冷顶电熔融技术应用探究

刘天璐,张艳春,刘 强,秦 谋,李 浩,张 君   

  1. 1. 中国雄安集团生态建设投资有限公司;2. 北京环卫集团房山有限公司
  • 出版日期:2024-03-01 发布日期:2024-03-01

Preliminary Study on the Application of Cold Top Electric Melting Technology of Fly Ash from Domestic Waste Incineration

LIU Tianlu, ZHANG Yanchun, LIU Qiang, QIN Mou, LI Hao, ZHANG Jun   

  1. 1. China Xiong’an Group Ecological Construction Investment Co Ltd.; 2. Beijing Environmental Sanitation Group Fangshan Co. Ltd.
  • Online:2024-03-01 Published:2024-03-01

摘要: 生活垃圾焚烧发电技术已经成为我国生活垃圾处理的主流工艺,生活垃圾焚烧产生的飞灰量近年来呈爆发式增长。“垃圾围城”的压力进而转变为飞灰填埋的窘迫,因此,飞灰处理成为亟待解决的问题。在“无废城市”建设的大背景下,通过冷顶电熔融技术尝试对焚烧飞灰进行资源化利用处置。通过某10 t/d冷顶电熔融设备对飞灰、石英砂和助溶剂进行电熔融试运行,分析熔融体重金属及二[口][恶]英浸出效果,为生活垃圾焚烧飞灰冷顶电熔融技术工业化提供基本数据支撑,证实了飞灰冷顶电熔融技术在工艺上具备可行性,以此探讨该技术的经济性和环境效益。

关键词: 生活垃圾, 焚烧飞灰, 冷顶电熔融, 二[口][恶]英

Abstract: Domestic waste incineration power generation technology has become the mainstream technology of solid waste treatment in our country. The amount of fly ash produced by solid waste incineration had increased explosively in recent years. The pressure of “city besieged by waste”turned into the distress of fly ash landfill, so the disposal of fly ash became an urgent problem to be solved. Under the background of “waste-free city”construction, an attempt was made to recycle incinerated fly ash by cold top electric melting technology. A 10 t/d cold top electric melting equipment was tested to melt fly ash, quartz sand and co-solvent, and the leaching effect of molten mass metal and dioxins were analyzed. It provided basic data support for the industrialization of the cold top electric melting technology of domestic waste fly ash and proved the feasible of the cold top electric melting technology in the process, so as to explore the economic analysis and environmental benefits of the technology.

Key words:  domestic waste, incineration fly ash, cold top electric melting, dioxin

[1] 邱清文. 生活垃圾焚烧飞灰填埋场岩土工程设计建议[J]. 环境卫生工程, 2025, 33(3): 64-69.
[2] 高 慧. 垃圾分类背景下广州市可回收物组分与特性研究[J]. 环境卫生工程, 2025, 33(3): 90-96.
[3] 段盼巧, 李雅昕, 白良成. 生活垃圾焚烧厂白烟来源及控制研究[J]. 环境卫生工程, 2025, 33(3): 102-106,113.
[4] 付 铠, 白 旭, 史佳雨, 钱鑫鑫, 刘 璐, 周亚倩, 王鹤立. 基于全流程的生活垃圾焚烧温室气体排放核算[J]. 环境卫生工程, 2025, 33(2): 12-18.
[5] 戚晓波, 易 鹏, 马云峰, 林晓青. 大比例掺烧典型工业固废对生活垃圾焚烧炉燃烧特性的影响研究[J]. 环境卫生工程, 2025, 33(2): 1-11.
[6] 齐佳楠, 周 硕, 宁 庆, 王 欢, 李 兵, 刘海威. 我国县域生活垃圾制备固体回收燃料工艺的技术经济性分析[J]. 环境卫生工程, 2025, 33(1): 23-31.
[7] 严浩文, 张 蓓, 王志强, 龙吉生, 金兴乾, 郭欣维. 生活垃圾焚烧发电项目烟气再循环技术工程实践与分析[J]. 环境卫生工程, 2025, 33(1): 98-102.
[8] 郭凯怡, 丁子航, 文思杰, 李 欢, 刘建国, 魏军晓. 湛江市生活垃圾运输环节温室气体量化与减排潜力研究[J]. 环境卫生工程, 2025, 33(1): 130-139.
[9] 王 川, 王慧爽, 邰 俊, 毕珠洁, 范帅康, 宋小龙. 源头分类对生活垃圾处理碳排放和减排效果的影响研究——以上海市干湿垃圾分类为例[J]. 环境卫生工程, 2025, 33(1): 140-140.
[10] 周白玉, 任 怡, 杜春燕, 朱 浩, 曹立民, 郭旭辉, 陈立坚, 韩智勇. 生活垃圾处理处置过程碳排放特征与碳达峰管理策略——基于成都市垃圾和填埋气产生实测数据的比较[J]. 环境卫生工程, 2024, 32(6): 10-19.
[11] 梁智飞, 祝雄涛. 注氧稳定化预处理技术在生活垃圾卫生填埋场存量垃圾开挖中的应用[J]. 环境卫生工程, 2024, 32(6): 90-95.
[12] 丁 琮. 华南某市近10年终端生活垃圾组分与特性分析[J]. 环境卫生工程, 2024, 32(5): 36-40.
[13] 陈 华, 何耀忠, 刘 帅, 刘 畅, 杨嘉杰. 大型生活垃圾填埋场阶段性封场综合整治工程——以广东省某市生活垃圾填埋场为例[J]. 环境卫生工程, 2024, 32(5): 93-98.
[14] 盛 宴, 林焕生, 杜月林, 丁前绅, 刘 磊. 填埋龄期及压实度对垃圾腐殖土力学性质的影响[J]. 环境卫生工程, 2024, 32(5): 104-111.
[15] 吕烨佳, 张 佳, 岳 阳, 钱光人. 焚烧飞灰深度资源化技术进展及展望(封面文章)[J]. 环境卫生工程, 2024, 32(4): 1-8.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 天津市城市管理研究中心
津ICP备2022007900号-1   津公网安备 12010302000952号   中央网信办违法和不良信息举报中心
地址:天津市河西区围堤道107号    邮政编码: 300201
电话: 022-28365069 传真: 022-28365080 E-mail: csglwyjs10@tj.gov.cn
本系统由北京玛格泰克科技发展有限公司设计开发